21
Wireless Flash
Transmission range (approx.)
0-100m
Built-in wireless
2.4G
Modulation mode
MSK
Channel
32
Wireless ID
01-99
Group
16
Other
Display
Large LCD panel, backlighting ON or OFF
Dimension/Weight
90x58x50/80g
2.G Wireless Frequency Range
2413.0MHz-2464.5MHz
Max. Transmitting Power of 2.4G
Wireless
5dbm
Restore Factory Settings
Synchronously press the two-function button in the middle and the restore factory
settings are finished until the “RESET” is displayed on the LCD panel.
Firmware Upgrade
This flash tigger supports firmware upgrade through the Type-CUSB port. Updated
information will be released on our official website.
•
USB connection line is not included in this product. As the USB port is a Type-C
USB socket, please use Type-C USB connection line.
•
As the firmware upgrade needs the support of Godox G2 software, please
download and install the “Godox G2”
firmware upgrade software” before
upgrading. Then, choose the related firmware file.
Attention
•
Unable to trigger flash or camera shutter. Make sure batteries are installed
correctly and Power Switch is turned on. Check if the transmitter and receiver are
set to the same channel, if the hotshoe mount or connection cable is well
connected, or if the flash triggers are set to the correct mode.
•
Camera shoots but does not focus. Check if the focus mode of the camera or lens
is set to MF. If so, set it to AF.
•
Signal disturbance or shooting interference. Change a different channel on the
device.
