7
Battery
AA alkaline batteries are recommended.
Installing Batterie
As shown in the illustration, slide the battery compartment lid of the flash trigger and
insert two AA batteries separately.
Battery Indication
Check the battery level indication on the LCD panel to see the remaining battery level
during the usage.
Battery Level Indication
Meaning
3 grids
Full
2 grids
Middle
1 grid
Low
Blank grid
Low battery, please replace it.
Blinking
<2.5V The battery level is going to be used
out immediately (please replace new
batteries, as low power lead to no flash or
flash missing in case of long distance).
The battery indication only refers to AA alkaline batteries. As the voltage of Ni-MH
battery tends to be low, please do not refer to this chart.
Using the Flash Trigger
Ass a Wireless Camera Flash Trigger
Take TT685C as an example:
•
Turn off the camera and mount the transmitter on camera hotshoe. Then, power
on the flash trigger and the camera.
