14
Flash Exposure Compensation Settings
Multi-group displays in the TTL mode
•
Press the group button to choose the group, turn the select dial, and the
FEC value will change from -3 to ~3 in 0.3 stop increments. Press the
<SET> button to confirm the setting.
•
Press <ALL> button to choose all groups
‘FEC
value, turn the select dial,
and all group’s FEC value will change from
-3 to ~3 in 0.3 stop increments.
Press <ALL> button again to confirm the setting.
One-group displays in the TTL mode
Turn the select dial and the group’s power output value will change from
-3 to ~3 in 0.3
stop increments.
Multi Flash Settings (Output Value, Times, and Frequency)
•
In the flash (TTL and M icon are not displayed)
•
The three lines are separately displayed as power output value, Times
(flash times) and Hz (flash frequency)
•
Turn the Select Dial to change the power output value from Min. to 1/4 in
integer stops.
•
Short press the Times button can change flash times. Turn the select dial
to change the setting value.
•
Short press the Hz button can change flash frequency. Turn the select dial
to change the setting value.
•
Until all the amounts are set. Or during any value setting, short press the
<MODE> button to exit the setting status. No values will blink.
•
In the multi flash setting submenu, short press the <MODE> button to
return to main menu when no values are blinking.
Note: As flash times are restricted by flash output value and flash frequency, the flash
times cannot surpass the upper value the permitted by the system. The times that
transported to the receiver and are a real flash time, which is also related to the
camera’s shutter setting.
