background image

YOU MUST CHECK 

THAT THE FRONT 

STEERING IS ADJUSTED 

CORRECTLY PRIOR 

TO RIDING. 

WARNING: This product is powered by a 2 stroke engine and requires pre-mixing petrol and 2 stroke oil. The oil mix should be 25:1. Never 

mix petrol and oil directly in the engine tank.

CHECK BRAKES

ARE ADJUSTED

CORRECTLY PRIOR

TO RIDING.

YOU MUST CHECK 

THAT THE CHAIN 

IS ADJUSTED 

CORRECTLY PRIOR 

TO RIDING. 

PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLY AND OPERATING OF YOUR VEHICLE.

Swing tags have been placed on your vehicle for you to identify checks that are located within this manual. Once you have performed the 

check required remove these swing tags and nylon loops attaching them to the vehicle.

MAKE SURE TO REMOVE THE SWING TAGS AND TAKE SPECIAL NOTICE TO REMOVE THE NYLON LOOP. 

The tags and loops that need to be removed from this model: GMX 49cc Junior Quad Bike

Mix only enough fuel for your immediate needs. 

Fuel should not be stored for more than 30 days.

Petrol/Oil

1 litre/40ml

2 litres/80ml

3 litres/120ml

4 litres/160ml

5 litres/200ml

ONCE SWING TAGS AND NYLON LOOPS ARE REMOVED YOU ARE ACKNOWLEDGING THAT THESE CHECKS HAVE BEEN PERFORMED 

There may be a “Spare Parts Package” within the carton so please check all of the packaging and DO NOT THROW OUT 

WARNINGS

SWING TAG’S & WARNINGS

BRAKE ADJUSTMENT x3

STEERING ADJUSTMENT x2 

CHAIN ADJUSTMENT 

ALWAYS LEAVE IN 

THE OFF POSITION 

WHEN NOT IN USE 

OR REMOVE KEYS

KEY REMOVAL

YOUR 2 STROKE GMX MODEL CAN BE GOVERNED DOWN TO A SLOWER SPEED, BUT NO MORE THAN 

20%. 80% POWER IS STILL REQUIRED FOR THE CLUTCH TO ENGAGE PROPERLY.

IF YOU GOVERN DOWN MORE THAN 20%, THE CLUTCH WILL NOT ENGAGE PROPERLY AND MAY CAUSE 

THE CLUTCH TO BURN OUT. THIS MAY VOID YOUR WARRANTY.

Содержание YA49D JUNIOR






















Отзывы: