GMX YA49D JUNIOR, Инструкция по сборке

Страница: 15 / 21

CONNECTING WIRING AND REMOTE KILL SWITCH
1. Locate the wiring loom
at the front of the quad.
3. Install the remote kill switch using the below instructions
- Locate the kill switch in the packaging
- Remove the dummy clip from the wiring loom WARNING* Keep this for the future. If you need to remove
the remote kill switch in the future if you do not place the plug back in there will be no kill switch at all
- Clip the remote kill switch (withought the fob) and make sure the clip is secure. There will sticky paper on
the rear to securely attach to the plate on the frame and cable tie in.
2. Clip the battery wire
together making sure
the clip is attached
correctly and clips in.