GMX YA49D JUNIOR, Инструкция по сборке

Страница: 18 / 21

13.
There is two bolts holding the exhaust in place and you will need
to loosen these as well but do not remove. Fig. 3 Fig. 4
Fig. 3 Fig. 4
Once these have been loosened you will be able to tighten the tensioner
bolts at the rear engine Fig. 5 so the chain is at the correct tension carefully
tightening slowly the left bolt then the right bolt.
Fig. 5
Once the chain is at the correct tension of between 10-12mm
you can tighten the exhaust bolts. Then tighten the six engine
mounting bolts.
***** TAKE SPECIAL CARE AND DON’T TIGHTEN
THESE BOLTS TOO MUCH AS YOU MAY DAMAGE
THE ENGINE CASING *****