GMW IPP 144 - 40 G, Руководство пользователя

Страница: 9 / 60

Voltage supply connector Screw type/terminals
Wire diameters fixed: 0,2 to 4 mm²
flexible: 0,2 to 2,5 mm²
AWG: 24 to 12
Interface I 9 pin D-Sub socket
Interface II 9 pin D-Sub socket
or
USB-B socket
Connection for paper
reroll mechanism
4pin MASCON, MLAS
Connection for
Alarm relay output
Screw type/terminal
fixed:
0,2 to 4 mm²
flexible: 0,2 to 2,5 mm²
AWG: 24 to 12
normally open
50 V AC, 2 A
30 V DC, 2 A
Dimensions
(W x H x D)
144 x 72 x 159 mm
Switchboard mounting screws against rear side
of switchboard
Internal fuse
( on power supply board)
12V DC : T 3,15 A
24V DC : T 2 A
110V - 230V AC : T 2 A
This operating manual applies to software version
6.10.12 and higher
49
Connections
Miscellaneous
8
8.4. Connection examples for
Gossen Müller & Weigert instruments
8.4.1. Connection of the IPP 144-40 GE to the DPM-MF
for the insertion of measured value into texts
For this configuration you must input and save the text as shown in section
7.4.1. of this manual.
The printer receives the measuring values via Interface I / RS 232 C (also
possible via Interface II). To selected the text see section 7.4.2 in this manual.
The relevant interface is the interface for which the parameters have to be set
in the menu program. The recommended configuration is: 8 data bits, no
parity, 1 stop bit, 9600 baud. With 7 bit, no parity, the sender must be set to
2 stop bits.
DPM...MF
IPP 144-40 GE
TxD
CTS
GND
OC 1
OC 2
3
4
6
5
7
2
8
1
5
RxD
RTS
GND
Sign.
GND
Interface I