GMW IPP 144 - 40 G, Руководство пользователя

Страница: 36 / 60

22
The menu
program
„Change
Parameters“
The menu program „Change Parameters“ can be called in
one of two ways:
Without prior printing of the current parameters:
Press both keys after the printout
„ACTUAL PARAMETERS ? ...“.
With prior printing of the current parameters:
Press both keys after printout
„CHANGE PARAMETERS ?“.
• •
• • •
• •
• • •
Quitting
the menu
program
If there are no keys pressed over a period of approximately
2 minutes, the program is terminated automatically and
any modifications made are not saved.
By pressing „ENTER“ and „SELECT“
simultaneously for approx. 4 seconds; the IPP 144
prints out the first parameter that can be modified.
(see changing parameters)
The program is terminated by simultaneously
pressing „ENTER“ and „SELECT“
following the printout
„END“.
All modified functions are saved.
35
Important notes:
<LF> on its own does not start the printing !
Between several text calls in a row there has to be a
gap of least 2 seconds to make sure no text is skipped
during printing !
Several text calls using <Ctrl C> and „normal“
transmissions must not be combined !
Combination of text and Date / time (protocol)
see chapter 6.4. !
To call a printer with an address:
Precede the call with the address (see chapter 7.2.).
Example for text entry are given in chapter 8.5.
.
.
.
.
<Ctrl E> Adr. <Ctrl E> <Ctrl C> Nr. <CR> <Ctrl D>
7.4.2. Text output
Calling via
serial Inter-
face
In order to print text, the printer must receive a
transmission with the following format:
< Ctrl C > text number < CR >
The printer looks up the stored text related with that
number and prints it.
If there is no such text, nothing is printed.