GMW IPP 144 - 40 G, Руководство пользователя

Страница: 56 / 60

Index
page
Accessories 56
Addressing 26, 30
Addressing & protocol / text 31
Basic version 5
Baudrate 25
Barcode Commands 47
Bitmap image Commands 43
Character set 24, 38
Connection diagrams 11
Connection Examples 59
Control characters 38
Data format - serial 25
Date / time - output via Interface II 28
Date / time - setting 26
End of paper indication 18
Environmental conditions 7
Enhanced version (E - version) 5
Handshake serial - RTS / DTR 31
Handshake serial - XON / XOFF 32
Headline data & time 29
Input buffer 7
Installation 10
Interface selection 14
Key LINE FEED / ENTER 18
Key lock 19
Key MENU / SELECT 18
KEY RESET 19
Line Feed Commands 45
Line width (characters per line) 24
Mechanical data 8
Menu program - complete selection 36
Menu program - entry 21
Menu program - quitting 22
Model types 4
page
Operating controls, general 18
Paper 6
Paper reroll mechanism 57
Parameters, changing 22, 23
Parameters, printing the current 21
Parity 25
Pin assignment current loop 16
Pin assignment - Interface I 15
Pin assignment - Interface II 17
Print character commands 41
Print control commands 40
Print format 24
Print interval - serial 32
Print interval - setting 24
Print mechanism 6
Protocol - serial 29
Replacing the paper roll 20
Snap lock 18
Software version 8
Start printing 30
Technical data 6
Text adding, overwrite 33
Text call with measured data, serial 34
Text - deleting 33
Text entry 33
Text entry - block 34
Text entry - wildcards 28
Text output 35
Voltage supply 7
Wildcards for measure value 34
Windows programming software 5
Write protection 19
2
3. Operation
è è è è è
Use the handle (4) to pull out the front panel (1).
è
Remove the holder (3) with the paper from roll body,
rotate the notch of the holder as show in the diagram.
è
Remove the paper drum from the holder.
è
Wind the paper once around the drum body (2) in the
direction indicated by the arrow.
è
Plug in the holder (3) in such a way that the pins fit
into the notches of the body.
è
Close the front panel.
è
Briefly press the „LINE FEED“ key at the
IPP 144 - 40 G until the paper has been straightened
out.
Removing
the paper
Inserting
the paper
55