GMW IPP 144 - 40 G, Руководство пользователя

Страница: 35 / 60

23
Changing
parameters
Example:
SET BAUDRATE NO ?
„SELECT“ „ENTER“
YES ?
„ENTER“
BAUDRATE 300
300
„SELECT“
600
„ENTER“
>>> 600
TO STORE BAUDRATE; PLEASE PRESS „ENTER“
SET BAUDRATE AGAIN, PLEASE PRESS „SELECT“
„ENTER“
SET DATA FORMAT NO ?
Explanation In case
1: Baudrate 600 (Baud) 2: Baudrate 300 (Baud)
is saved is saved
The IPP 144 prints one of the changeable
parameters:
Press „ENTER“ to accept the parameter and
to move to the next one.
Press „SELECT“ to display the next
parameter option.
34
Reserving
space for
measured
variables In order to be able to insert measured value (variables) into
text afterwards, the location within the text must be marked
using <Ctrl V>, which reserves 6 spaces into which any
characters may be entered, since they are overwritten at a
later time anyway; they are merely wildcards.
Creating a
text block
Example:
Entry:
TEMPERATURE <Ctrl V> XXXXX °C <CR>
<Ctrl> counts as one digit, so you only have to enter 5
wildcard characters.
The printout would look like this:
TEMPERATURE 263,45 °C.
A text block is created by combining several texts.
A text block can be printed in a single call.
To achieve this, place the beginning and the end of the text
in brackets at entry time. Use the control characters:
<Ctrl X>= opening bracket
<Ctrl Y>= closing bracket.
The texts within a text block
mus have continuous numbers !
To delete text within a text block without creating a
blank line, the text numbers following the deleted
line must be decreased by 1 to move them forward.
This is not done automatically but has to be entered
manually.