GMW IPP 144 - 40 G, Руководство пользователя

Страница: 39 / 60

Locking the
menu / Select
key
RESET -key
If the jumper B is connected, the „MENU / SELECT“ key
is locked; parameters can neither be printed nor modified.
In order to print or modify parameters:
remove jumper B !
The key S102 resets the printer to the standby mode. The
menu parameters will not to be changed.
19
Paper cutting
edge
(1)
Snap lock
(9)
In order to tear off the paper, pull the paper quickly
sideways and up.
Push this to the right hand side to open the front panel in
order to be able to replace the paper roll or to set the slider
switch S 101 which is used to set the desired interface (see
chapter 4.2. „Interface selection“) or to set the RESET
switch S 102.
8.2. Character sets
Control character used for data transmission
General purpose characters
Character HEX Significance Name
Ctrl D 04 End of transmission EOT
Ctrl E 05 Set address ENQ
Ctrl J 0 A Line feed LF
Ctrl M 0D Carriage return CR
Ctrl Q 11 Ready to receive XON
Ctrl S 13 Busy XOFF
Additional characters used by the printer
Ctrl F 06 48 character / line
Ctrl R 12 24 character / line
Ctrl T 14 Inverted printing
Ctrl U 15 Normal printing
Ctrl W 17 transmit request: date / time
Ctrl ^ 1E Print: date / time in protocol
Ctrl C 03 Text call
Ctrl X 18 Start of text block
Ctrl Y 19 End of text block
Ctrl V 16 Reserve space for measure variable (6 digits)
Character set - various languages
The following HEX codes differ from the ASCII character set:
Hex-Code 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
ASCII # $ @ [ \ ] ^ ` { ¦ } ~
German # $ § Ä Ö Ü ^ ` ä ö ü ß
S / SF # É Ä Ö Å Ü é ä ö å ü
French # $ à ° ç § ^ ` é ù è
Danish # $ É Æ Ø Å Ü é æ ø å ü
Norwegian #
Spanish # $ à Í Ñ é ` ñ ´ ´
English $ @ [ \ ` | }
?
:
o u
38
] ^ { ~ £
É Æ Ø Å Ü é æ ø å ü