GMW IPP 144 - 40 G, Руководство пользователя

Страница: 29 / 60

28
6.4. Date / time output
(E - Version)
Output
Date and time may be transmitted via the serial Interface II
Request:
Addressed:
The IPP 144 returns date / time in the format:
< CR > < LF >
15.03.2004
17:03:24
< CR > < LF >
During the transmission, no data can be received
(RTS = LOW).
< Ctrl W > < CR >
<Ctrl E> Adr. <Ctrl E> <Ctrl W> <CR> <Ctrl D>
If „YES“ is selected, the follow selectíons are displayed:
„W ---> S (+1 h)“ (winter time)
„S ---> W (- 1 h)“ (summer time)
After setting time the current time will be printed. Press
„ENTER“ to store time or press „SELECT“ to set time again.
Set Summer
Winter Time
Mode Set one hour plus or minus for Summer/ Winter Time Mode
following is displayed:
CHANGE TIME W<->S NO ?
e.g.:
15.03.2004
16:57:30
Oil temperature 367,5 °C
Oil pressure o.k.
Boiler 1
Pause >
15.03.20004 16:58:59
Boiler 2 still active
Temperature 258,6 °C
Date and time only precede the transmission if the
character <Ctrl ^> has been received.
PRINT DATE / TIME CTRL „ ^ „
PRINT DATE / TIME HEADLINE
Serial
protocol
Print
date/time
„always“
There are two options available:
Each transmission is preceded with the date/time (always).
Date and time only precede the transmission if control
command has been received.
this optional feature is selected in the menu program under:
For several messages in a row (i.e. the IPP 144 is still
printing), the date & time is printed once only at the
beginning of the transmission.
The IPP 144 is capable of printing date and time together
with measured values or text as a protocol. In this case,
date and time precede the printout.
Print date/
time with a
received
control
command
29