GMW IPP 144 - 40 G, Руководство пользователя

Страница: 46 / 60

12 45
Serial
Interface I
Pin Signal
1 GND Ground (shield)
2 RXD (+) Receive data
3 +5 V Output +5 V / 20 mA
4 n.c.
5 RXD (-) Signal ground
6 DTR Open collector; active if
DTR is +8 V
7 DTR (Data Terminal Ready)
+8 V: ready to receive
-7 V: not ready to receive
8 RTS (Request To Send)
+8 V: ready to receive
-7 V: not ready to receive
(text buffer is full)
9 RTS Open Collector; active if
RTS is +8 V
The serial Interface I has been designed to allow the
implementation of all widely used interfaces:
RS 232 C; RS 422; RS 485 and Current loop.
See chapter 4.3.: Connecting diagram
The required total number of bitmap image data is
((nL + nH x 256) x no. of data per line) bytes.
The format of bitmap data for a printer with n heating
elements in the head is as follows:
MSB LSB
d1 d2 d3 ...... d (n/8)
d (n/8)+1 d (n/8)+2 d (n/8)+3 ...... d (2n/8)
d (2n/8)+1 d (2n/8)+2 d (2n/8)+3 ...... d (3n/8)
:
:
.......
d (nL+nHx256)x(n/8)
Sets initial
line feed
8.3.4. Line feed commands
Command: ESC 2
<< Code >>
0x1B , 0x32
<< Function >>
Sets the amount of the initial line feed per line to 30 dots.
<< Details >>:
The amount of the initial line feed can be set separately for
the standard mode.