Glutz Home Biometrics, Инструкция по эксплуатации

Страница: 38 / 40

38
10. Updating the software
We continuously improve our products and equip them with new functions.
You can perform a software update on the finger scanner and on the control unit.
Contact your specialist retailer for more information.
11. Error displays and trouble-
shooting for the finger scanner
If these remedies do not solve the problem, contact your specialist partner. If the
system has to be sent to Glutz, please ensure that it is packed correctly. Unsuitable
packaging may void any warranty claims.
Display Meaning Remedy
Status LED
illuminates red.
The finger or the RFID
transponder was not recognised
Draw the finger over
the sensor again.
Check whether your RFID
transponder is valid.
Status LED
illuminates red.
The finger scanner illuminates
red immediately. No fingers or RFID
transponders are stored.
Store at least one
finger or one RFID transponder.
Status LED
blinks red/green
The sensor of the finger scanner
is dirty or defective.
Clean the sensor.
Status LED illu-
minates blue, left
function LED blinks
red/green.
The sensor of the finger scanner with
RFID function is dirty or defective, but
the RFID function still works.
Clean the sensor.