Glutz Home Biometrics, Инструкция по эксплуатации

Страница: 33 / 40

33
8.7 Deleting all users and RFID transponders
All user fingers and RFID transponders stored in the
system are deleted. The admin fingers are still stored.
Initial situation: The system is in normal operation.
Action Description Display
1.
Perform three finger touches on the
sensor within 5 s. This opens the
admin
menu.
Status LED illuminates blue,
Function LEDs illuminate
green alternatingly.
2.
Draw any admin finger over the
sensor.
The admin finger was not
recognised. Repeat step 1.
Status LED illuminates blue,
Function LEDs blink green.
Status LED illuminates red.
3.
Wait 5 s. Status LED illuminates blue,
Function LEDs blink red/green.
4.
Perform a finger touch on the
sensor.
Status LED illuminates blue,
Function LEDs illuminate
left red, right green.
5.
Draw the same admin finger over the
sensor as in step 1.
Status LED blinks red/orange,
Function LEDs blink green.
6.
No action
necessary.
Status LED illuminates blue.
7.
Draw any user finger over the sensor
or hold up any RFID transponder to
check. No finger or RFID transponder
can be enabled.
Status LED illuminates red.
8.
No action
necessary.
Status LED illuminates blue.
Result: All user fingers and RFID transponders were deleted.
The system is in normal operation.