Glutz Home Biometrics, Инструкция по эксплуатации

Страница: 30 / 40

30
Action Description Display
1.
Draw a stored user finger over the
sensor.
The user finger was not recognised.
Repeat step 1.
Status LED illuminates green.
Status LED illuminates red.
2.
No action
necessary.
The door opens. Status LED illuminates blue.
Action Description Display
1.
Hold a stored RFID transponder in
front of the finger guide of the finger
scanner.
The RFID transponder was not recog-
nised. Repeat step 1 with a valid RFID
transponder.
Status LED illuminates green.
Short tone.
Status LED illuminates red.
Long tone.
2.
No action
necessary.
The door opens. Status LED illuminates blue.
8.4 Opening the door
The main purpose of the product is door opening.
This can take place with the finger scanner, an RFID transponder or with
the digital input.
Initial situation: The system is in normal operation.
With the finger scanner
With an RFID transponder
Opening with an RFID transponder is only possible with finger
scanners with RFID function.
With the digital input (door button function)
You can also open the door via the digital input of the control units. The relay switches
for at least 3 s. If the digital input is activated for longer than 3 s, the relays switches for
as long as the digital input is activated.