Glutz Home Biometrics, Инструкция по эксплуатации

Страница: 16 / 40

16
The pairing can take place by means of card programming
or software programming:
1. Card programming: See 'eAccess operating manual
Card programming', available at www.glutz.com
2. Software programming: Both devices must be at the same access point
see 'eAccess operating manual',
available at www.glutz.com
2. Variants: With control unit 82740 or 82741
With use of control unit 82740 / 82741 in combination with an eAccess
fitting, the control unit must be paired with the fitting.
Description Display
1.
Secure the
assembly status
of the devices.
Close the
covers.
2.
Connect the
power supply
unit to the mains
voltage.
The upper status LED of the mini control
unit 1 relay blinks orange/green alternatingly
and/or the LED of the micro control unit 1 relay
slowly blinks green: factory setting.
3.
No
Action
required
Status LED of
the finger scanner
blinks blue
4.
Pairing of eAccess
fitting and control
unit 82740 / 82741
The fitting LED
illuminates green