Glutz Home Biometrics, Инструкция по эксплуатации

Страница: 35 / 40

35
9.1 About the finger scanner
The resetting to factory settings is triggered with the finger scanner.
All user and admin fingers and all RFID transponders are permanently deleted.
With the Bluetooth finger scanner, the pairing code is also reset to 9999.
At least 2 admin fingers must be stored to reset the Bluetooth scanner.
The system is in normal operation.
The finger scanner was reset to factory settings.
Now you can re-commission the system.
See 8.1 'Storing the admin finger and establishing normal operation'
See 7 'Establishing normal operation and use of the finger scanner with app'
Action Description Display
1.
Perform three finger touches on the
sensor. This opens the admin menu.
Status LED illuminates blue,
Function LEDs illuminate
green alternatingly.
2.
Draw any admin finger over
the sensor.
The admin finger was not recognised.
Repeat step 1.
Status LED illuminates blue,
Function LEDs blink green.
Status LED illuminates red.
3.
Wait 5 s. Status LED illuminates blue,
Function LEDs blink red/green.
4.
Perform a finger touch on the
sensor.
Status LED illuminates blue,
Function LEDs illuminate
left red, right green.
5.
Draw another admin finger over the
sensor as in step 2.
Status LED blink green,
Function LEDs blink red.
6.
Wait 5 s. Status LED blinks blue.
7.
No action
necessary.
The upper status LED of the mini
control unit 1 relay blinks
orange/green and/or the LED of
the micro control unit 1 relay
slowly blinks green.