GLP
German Light Products GmbH
(instruction version 1.33 / from software version 1.53)
38
Attention:
•
Never let optical parts come into contact with oil or fat.
•
Before running the fixture wait until all parts are dried up.
•
Clean lenses only with dry clothes. Never use water or other cleaners.
•
Change lenses if they look milky. For that please contact your local
dealer.
7.3 Cleaning the Optical System
1. Pull out the main plug!
2. Wait min. 20 minutes after the last operation to cool down the fixture.
3. Open the upper shell of the head casing by loosening the 4 quick look
fasteners. Two on the front side and two on the back side of the head.
4. Do the work as explained in the list above.
5. Before you put the
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
C
C
M
M
Y
Y
into operation close the casing, otherwise
your retina can be hurt!
8 Technical
Specification
Power supply
Power consumption
~90 - 260V, 50 - 60 Hz
1000 Watt, 4.5 A, electronic ballast, (blind current compensated)
Fuse protection
For 230 V / 115 V:
Lamp: T 5A / T 10A, 5x20 mm (fine-wire fuse)
Electronic: T 1A / T 2A, 5x20 mm (fine-wire fuse)
Lamp
Type
HTI 700-DE (OSRAM, SharXS)
Live time
750h
Color temperature
7500k
Luminous flux
59.000 lm
Optical system
Dichroic coated glass reflector
Beam angel 14° - 32°
Lenses hardened and tempered, anti-reflex coated
Colors (8/16 Bit)
Color wheel 1: 8 dichroic filters plus white, 9 half colors
Gobos (8/16 Bit)
Gobo wheel 1: 7 exchangeable rotating and indexed Gobos plus "open" (5x Glass Gobos, 2x
Aluminum Gobos)
All rotating Gobos exchangeable, 11 spare Gobos, Gobo thickness glass = 1.1 - 3.0 mm
