GLP
German Light Products GmbH
(instruction version 1.33 / from software version 1.53)
31
11) Connect the "Data Bus" cable with the corresponding socket again.
12) Close the
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
C
C
M
M
Y
Y
in reverse order.
6.3 Changing Gobos and Color filters
The is
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
C
C
M
M
Y
Y
equipped both with Aluminum- and Glass gobos (outside
diameter 27 mm, image size 23 mm). When using customized Gobos like
company logos and writing the recommended image size is 20 mm. You can use
either Aluminum (thickness = 0.3 mm) or glass gobos (thickness = 1.1 - 3.0 mm).
There is one Gobo wheel with rotating Gobos and one with fixed Gobos. Gobos
from the rotating wheel can be exchanged as desired.
6.3.1 General remarks for changing Gobos and Colors
All Gobos, Color filters or other optical effects do have a dedicated
mounting direction. To prevent undesired damages and to optimize the
optical illustration, all effect should be mounted with their reflecting side in
the direction of the lamp. This means for:
a) Aluminum Gobos must be mounted with their unpainted side toward the
lamp. The black painted side in the direction of the front lens.
b) Glass Gobos must be mounted with their reflecting side toward the
lamp. For Gobo holder this is already set in advance. In case you would
like to exchange also them (e.g. to use customized Gobos with
company logos etc.) you should make sure that also here the reflecting
side is in the direction of the lamp. But this is not always very simple so
please apply the following test.
Hold for example a pencil directly in front of the Gobo. If this is the
uncoated side of the Gobo you will see a small distance (thickness of
the Glass Gobo) between the mirror image and the pencil
Æ
This is the
reflecting side which should be mounted towards the lamp.
