GLP
German Light Products GmbH
(instruction version 1.33 / from software version 1.53)
30
4) Open the two locking screws one on the left and one on the right side by 1-2
turns (it is not necessary to remove them completely). Press them inwards to
open the lateral locking and pull out the plug-in carefully. The plug-in is lead by
two lateral tracks. A moderate effort is normal when pulling out.
Attention:
Don't use sensitive components like optical devices,
Gobo- and Color wheels or cables to remove the plug-in. You
can use the metal plates or the stepping motors instead.
5) Please remove the optical plug-in now completely and put it
carefully down.
6) Open the three knurled screws lying on the central axis of
the plug-in. There are further knurled screws on the
module which do not have to be open for changing Gobos
or Color filters.
1
2
3
7) Open the module and put it on the
backside down. You can now reach all
Gobo- or Color wheels.
8) Realize the exchange or service as
desired
Æ
see following chapters
below.
9) Fold up the module again and screw
up the three knurled screws by hand.
10) Insert the plug-in back to the fixture
and the two lateral tracks. Push it
carefully down until the two locking
screws snap in. Close them hand-
screwed.
