GLP
German Light Products GmbH
(instruction version 1.33 / from software version 1.53)
29
4x 90°
6 Optical plug-in module (inside the fixture)
The
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
C
C
M
M
Y
Y
is equipped with an optical plug-in which can removed completely.
This allows you a very comfortable and fast way to do all types of services inside the
fixture like as changing gobos and colors, cleaning or maintenance. Please apply for
this the following procedure:
6.1 Safety
regulations
•
Pull out the main plug!
•
Wait min. 20 minutes after the last operation to cool down
the fixture.
•
For a safe and convenient operation the head can be
locked in various positions. Please unlock the head
before switching on again.
•
Don’t touch the bulb of the lamp with bare fingers (this
can cause damages).
•
Before you put the
Y
Y
P
P
O
O
C
C
7
7
0
0
0
0
C
C
M
M
Y
Y
into operation
close the casing, otherwise your retina can be hurt!
6.2 Taking out and opening optical plug-in
1) Please lock the head for a safe and convenient operation.
2) Open the upper shell of the head casing by loosening the 4 quick release
fasteners. Two on the front side and 2 on the back side of the head. Hang out
the head safety.
3) Disconnect the right "Data Bus" cable from the circuit board of the plug-in. This
is the only connection which needs to be removed.
2x
Data Bus
