Globe 50586, Руководство пользователя

Страница: 5 / 15

3-WAY
For lights switched from
TWO
locations.
1 SMART SWITCH
For retrofit applications.
1.
Remove the existing wall plate and screws from the wall after having
turned off the power at the circuit breaker and tested
the outlet with a voltage tester.
2.
Remove the existing switch from the wall and label the wires
with the appropriate stickers included in the box.
3) Ensure these wires are available
a. For Smart Switch:
i. Line (black
ii. Ground (green, or yellow/green
iii. Neutral (white) x2
iv. Load (red)
v. Traveler (Brown)
b. For Standard on/off switch:
i. Line (black
ii. Ground (green, or yellow/green
iii. Traveler (Brown)
4. Connect the Wi-Fi switch (model 50586) to the existing wiring
(See
“Wiring Diagram”)
5. Connect the WI-FI on/off switch to the existing wiring:
a. Connect Ground (Green, A) wire on the switch to the Ground (green)
wire from the standard switch then to the Ground (Green) wire from the
breaker box.
b. Connect the Line (Black, D) wire on the switch to the Line (Black) wire
from the standard switch and then to the Line (Black) wire from the
breaker box.
c. Connect the Neutral (White, B) wire on the switch and the Neutral
(white) wire coming from the light to the Neutral (White) wire from the
breaker box.
d. Connect the Load (Red, E) wire on the switch to the Load (red) wire from
the light
e. Connect the Traveler (Brown, C) wire on the switch to the Traveler
(brown) wire from the existing switch.
6. E nsure the included wire nuts are securely fastened to each wire.
7. Restore power at the circuit breaker switch to test if the switch works.
8. Insert the new switch into the wall. Cover with the wall plate and screws
provided.