Globe 50586, Руководство пользователя

Страница: 2 / 15

ON/OFF SWITCH
INTENDED USE
50586
SPECIFICATION
FEATURES
SAVE THESE INSTRUCTIONS
• Replace existing on/off or dimmer switches and make them smart
• Manually or remotely control your wall switch with the Amazon Alexa app
• Pair with Amazon echo to control your switch through voice commands
• Set schedules and control your switch from anywhere
• This product is intended to be used as a wall switch to control incandescent and Led light bulbs as part of
permanent fixtures. It is intended to replace a standard switch receptacle. It can be connected and controlled
through a WI-FI connection with the Amazon Alexa app or other external Alexa built-in devices.
• Intended for household use only
• Intended to be used in dry indoor areas only
Switch type Single pole + 3-Way
120Vac / 60Hz
Wiring
Maximum Load
Standby Power
Start up Time
Wireless Control Module
Status Indicator
On/Off switch
Main unit
<0.5W
<1 second
Wi-Fi 2.4GHz, IEEE 802.11 b/g/n
Bluetooth Low Energy
Does not support 5GHz networks,
BLE only for pairing the phone and device
Rated input voltage
108-132Vac
Incandescent: 600W max.
LED: 150W max.
Input Voltage Range
Wire to wire connection
Neutral wire is required
Thank you for selecting Globe
as your smart home solution.
With proper care, this product will
provide years of pleasure and enjoyment.
Step-by-step
Product Instruction Video
Scan with your
mobile device
This Smart Switch is warranted to last 1 year from the date of purchase. If it fails before that time, we will replace it. Send Globe Electric the
Smart Switch, proof of purchase and register receipt along with your complete name and address. See caution text for proper use. This
warranty is void if this product is misused in any way. This replacement is the sole remedy available and liability for incidental or consequential
damage is expressly excluded.
For use only in 120V/60HZ circuits. Risk of electrical shock. Do not open, no user-serviceable parts inside. This device is not intended for use
with emergency exit fixtures or emergency exit lights, photocells and electronic timers. Do not use where directly exposed to water. If this
situation is undesirable for the application, follow the manufacturer’s instructions for replacing the device. Minimum operating temperature is
-20°C (-4°F).
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and
operated with minimum distance 20cm between the radiator & your body.
User Manual Notice for License Exempt Radio Apparatus
This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device. CAN ICES-005 (B).
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
FCC Responsible party
Globe Electric
15301 Shoemaker Ave, Norwalk, CA 90650
www.globe-electric.com
Most electrical accidents are caused by carelessness or ignorance. If you combine a basic knowledge of electricity,
a healthy respect for it, and a dose of common sense, you can safely tackle many household electrical repairs.
Here are some basic guidelines for working with electricity:
• Before working on a circuit, go to the main service panel and remove the fuse or trip the breaker that controls
that circuit. Tape a sign to the panel warning others to leave the circuit alone while you work.
• Before touching any wire, use a voltage tester to make sure it’s not live. Whenever you check for voltage in a receptacle,
check both outlets—each may be controlled by a separate wiring circuit.
• To protect children, place safety covers over any unused outlets.
• Always work with enough light to see what you are doing; it’s easy to make mistakes when you’re working in dim light.
Before assembling your smart switch fixture, TURN OFF THE POWER and consult a qualified licensed electrician.