Globe 50586, Руководство пользователя

Страница: 7 / 15

INSTRUCTIONS DE CONNEXION
50457
1. Download the Amazon Ale
x
a app.
2. Power on your device.
Ensure your smart switch is installed correctly and powered on.
3. Scan barcode
• Launch the Amazon Alexa app.
• Select “Add a Device”.
• Select “Smart switch”, locate Globe Electric and follow the in-app
instructions on how to scan the 2D barcode.
Please note:
Don’t have a barcode?
Select "Don't have a barcode?" in the Alexa app and follow the in-app
instructions on how to connect without a 2D barcode.
How to factory reset device
If you are struggling to set up your device, or if the device
was already connected to a network, perform a factory reset by following the
instructions below:
1. Turn the device ON
2. Press and hold the ON/OFF button down for 10 seconds.
3. Let go of the button once the light is flashing RED and GREEN indicating a successful reset.
Check out product videos on
our Youtube channel, from
the Globe x Amazon Alexa -
Smart Devices playlist.
The device is automatically in pairing for 5 minutes once powered on. When you scan the
barcode, the white light will flash indicating the pairing is successful. If within 5 minutes,
it does not connect, turn the device OFF and ON again to re-enter pairing mode.
QR
Please keep these instructions
in a safe place. This is the only
duplicate of the unique QR
code for your product.
Y
ou
may need it to reconnect the
product to your account or
transfer it to another account.