Globe Wireless iFusion i250, Руководство пользователя

Страница: 104 / 162

SWG-125 Rev. G
June 2013
Globe
i
Fusion
®
User Guide for
i
500,
i
250,
i
S Rev. G 9-16
The
Firewall Settings
for the
Globe
i
Fusion®
are configured by the customer using the
Globe
i
Portal
.
This screen displays a read-only listing of the following:
Application
The program or type of service which uses the port
Port
The Internet Protocol port opened
Protocol
This is either TCP or UDP
Destination
If any destination hosts were specified, they will be listed here
9.3.5 IP Configuration
Click on the
IP Configuration
tab to display the
Globe
i
Fusion® LAN Settings
and
Globe
i
Fusion®
DHCP Settings
screen which displays the current settings. These settings are read only and reflect
the settings used by the
Globe
i
Fusion
® on the rear physical ports labeled LAN 1 through LAN 4.
Dynamic Host Configuration Protocol
(DHCP) is used to automatically configure the IP address,
subnet mask, and default gateway of computers and other networking devices that request
configuration. The
Start
and
End
addresses show the range of IP addresses which will be given to
these devices.
You cannot manually assign IP addresses to computers or devices in this range when
DHCP
is enabled.