Globaljig Super Rotax, Руководство пользователя

Страница: 7 / 46

INSTRUCTION MANUAL Issue.
08 / 2004
Pag.
5 - 42
3.1.3
EQUIPMENT IDENTIFICATION DATA
All identification data are written on an alluminium plate positioned on the internal cross beam on
the front of the bench, and it reports : the name of the manufacturer GLOBALJIG
INTERNATIONAL. srl - Via Aurelia Ovest, Km 383 - 54100 Massa - ITALIA
•
The serial number : SR xxx, wheew xxx represents the progressive serial number
•
CE mark.
IT IS STRICTLY FORBIDDEN TO REMOVE, CHANGE OR DAMAGE THE ABOVE
MENTIONED PLATE.
3.2 TECHNICAL DATA
– Rated Votage: 200 / 415 V-50 / 60 Hz
– Rated power: 2,5 Kw
– Rated capacity: 3500 kg*
– Lifting Height: 1750 mm
– Lifting/lowering time: 60 / 72 sec
– Oil pressure: 200 bar
– L.B. mass values.: see drawing page 6.
The Super Rotax equipment is produced in the following versions:
– with 4 meters bench, with 1 or 2 pulling arms
– with 5 meters bench, with 1 or 2 pulling arms.
If not otherwise specified, the technical data here described refers to both versions.
The noise produced by the equipment always below 85 dB (A).
*The useful lifting capacity is intended
with the bench already equiped
complete with cross beams, jigs and
pulling tower.
For each extra pulling tower the useful
lifting capacity decreases by 350Kg.