Globaljig Super Rotax, Руководство пользователя

Страница: 18 / 46

INSTRUCTION MANUAL Issue.
08 / 2004
Pag.
16 - 42
WARNING
WARNING
DANGER
6.4.2 TO THE ELECTRIC POWER PLANT
Do not make any connection to the plant before having carried out the complete
connection of all other plants.
All interventions on the electrica plant, even if they are simple operations, must be
carried out by Trained Personnel Only.
The Power unit Cabinet is supplied with a plug on top left of its backside. (see Picture 6-12 ).
The plug for the connection cable to power supply is included as well.
For the connection use multipolar cable with a 4 conductors min. Of 2,5 mm
2
each, 3 1 ground
(yellow-green) according to the present regulations.
For the German market use pentapolar cable with same characteristics as above.
Standard functioning of the L.B. requires a three phase supply 400V and it is already provided for this
voltage.
Before making any connection, always check that the voltage value marked in the
plate (place near the plug on the back of the cabinet) is the same of the plant
voltage ., as shown in
Picture 6-12.
In case it is not the same please refer to the drawing on page 17 in order to carry out the necessary
equalizing.
Photo 6-12