Globaljig Super Rotax, Руководство пользователя

Страница: 39 / 46

INSTRUCTION MANUAL Issue.
08 / 2004
Pag.
37 - 42
11. START AND STOP – SAFETY PROCEDURES.
11.1. Start up operations
Starting position: the bench is completly lowered and it may be in one of the possible situations
that follows.
- With crossbeams and bases
- With side runners
- With the Globaljig system and the vehicle already in position
- With side runners and vehicle
Before activating the lifting bench:
- Check if the power is available.
- Check the Working Area, make sure that the area is free from objects or people.
- Check the correct position of the ramps.
- Check the load stability.
11.2. Stopping operations
At the end of the job or when you have to have a long break, you should:
– Reposition the bench horizontally and at its minimum height .
– Turn off the main switch (on the power unit console) in position O.
11.3. Stopping operations in case of a blackout.
In case of a blackout, the lifting bench is out of work and even if it is still safe, (the barring gear is
activated), you must turn off the main switch on the console, until the power is restored.