Globaljig Super Rotax, Руководство пользователя

Страница: 9 / 46

INSTRUCTION MANUAL Issue.
08 / 2004
Pag.
7 - 42
5. INSTALLATION
The installation of the L.B. must be carried out by trained personnel only who must follow the
instructions contained in this manual.
The “Lifting Bench” is packaged as
shown in this picture .
Fig. 5-01
5.1. HOW TO MOVE THE PACKAGE
Once you have chosen the suitable area to
locate the equipment, use a fork lift truck
min. Capacity 2,0 tons to move the package
“L.B.”.
Fig. 5-02
Please note:
when positioning the “L.B.”
you should :
–
Consider the vehicle’s side for lifting and lowering, called Front Side. The manufacturer plate
(pag.05) positioned on the first crossbeam of the bench deternines the Front Side.
– please read chapter 10 (Working Area) and chapter 14 (Overall Drawing).
After you have positioned the “L.B.”,
remove the wooden pallet from beneath the
lift. You can do this using standard jacks.
Fig. 5-03
Proceeding with the utmost care, remove the
wooden pallet from underneath the “L.B.”
Fig. 5-04
During this lifting operation, you should protect the rack under the
bench from any damage for this reason you should insert a wooden
spacer between the jack and the bench.
WARNING