Global Lift Rotational R-450A, Руководство пользователя

Страница: 25 / 49

Step 2
: You will need a 5” diameter core drilling bit.
•
Make sure you have accurately marked your hole location to be drilled. After drilling
Your hole (picture A), it must be 6” deep and flat on the bottom of the hole (shown above). Also
Double check your measurements they should be: Place your anchor sleeve in the hole
And make sure the front edge of the sleeve is in between 12” minimum distance and 24”
Maximum distance from pools edge or 13” min if an obstacle is present before the water,
along with connecting the binding screw to the bonding grid according to the
local code and ordinances.
Picture A
Picture B
Front edge of anchor sleeve
Measure Distance to
make sure It’s 12”
minimum and 24”
maximum from
water’s edge or 13”
min if an obstacle is
present before the
water
FEB 2012 RETRO-FIT Anchor R-450A
R-450A