•Page
globalcontract.com
30
GLOBAL
Contract
• August 2018
INSTALLATION GUIDELINES
STEP 8: Press the bracket’s notch against the rear work surface edge.
STEP 9: Establish side-to-side bracket’s location by inserting the roller bushing A
into the vertical track B.Leave ” gap C between the bracket and the extrusion.
STEP 10: Secure all four top brackets to work surfaces
Note:TEST THE FINAL ASSEMBLY!Ride either work surface up and down its entire
height-adjustment range.
If the table frame structure is correctly assembled and if both work surfaces are
parallel to each other (precise 4.500” gap between the rear edges) rollers should
ride smoothly within the tacks.If not make table structure, work surface position
or top bracket adjustments as necessary.
Stationary Divider Install continued.
10
9
A
B
C
8
