•Page
globalcontract.com
26
GLOBAL
Contract
• August 2018
INSTALLATION GUIDELINES
BWATMGD Table Mounted Glass Divider
Secure the brackets to the glass
STEP 1: Slide the rubber washer onto the threaded studs.
STEP 2: Slide the spacers onto the threaded studs with flange first.
STEP 3: Position the bracket onto the glass and secure it with two anodized
caps.
Insert a pin into the cap hole and tighten it. Align the table mounted framed
divider brackets with inserts in the divider.
Note: The reinforced side of the bracket faces outside.
STEP 4: Secure each bracket with supplied 1/4-20 x ¾” machine screws and
tighten.
Note: FreeFit single table dividers are 72” wide and are provided with 3
brackets.
STEP 5: Have two installers hold the divider. Align the edges of both brackets
with the back edge of the worksurface and place them at equal distances.
STEP 6: Secure brackets with the twelve supplied screws.
6
5
4
3
2
1
