Page
•
globalcontract.com
13
• August 2018
GLOBAL
Contract
INSTALLATION GUIDELINES
Height Adjustable Single Table - Feet
BWA2DxxxxA9, BWAG2DxxxxA9, BWA2DxxxxA8, BWAG2DxxxxA8
Assemble the feet on the columns. Tighten screws firmly.
IMPORTANT: Make sure the correct screws are used. Using too long screws may
destroy the internal parts in the column.
Screw socket round UNC 5/16 - 18x5/8” Zn
Column cross beam
Secure the column cross beam to the columns.
STEP 1: Drive one Socket head screws 5/16-18 x 1” into column as illustrated. Do not
tighten.
STEP 2: Position the column cross beam’s key-hole over the preinstalled socket
head screw and drive in the second socket head screw. Once the column cross beam
orientation is completed, one pair of holes will end up at the beam’s bottom (A) and
the second pair (B) will point toward the centre of the table.
STEP 3: Tighten all socket head screws to ensure a firm and safe column – to - col-
umn cross bar connection.
1
2
3
B
A
