GlideTrak Indoor Trainer, Руководство пользователя

Страница: 7 / 28

GlideTrak Assembly & Set Up
7
12 . Once sections A through D are joined, you will have two sections of the GlideTrak frame as shown in
Photo 6.
13. Slide the two sections together,
aligning stickers E to E and F to F.
The Frame Base will be assembled as
shown in Photo 7 Frame Base. It may
help to unlock the brakes on one
section before sliding the two sections
together. Once in place, re-lock the
brakes.
14. Once the frame is together, place and
tighten Barrel Bolts at E and F .
(Note: If basket pins were ordered, do not
use pins to connect base parts EE, FF or
GG. Only use Barrel Bolts to connect
base leg parts EE, FF, and GG)
Photo 7
Frame Base
F
E
Photo 6
Frame Sections
Rear Mid-Section
with letters C and D
at bottom edges and
letter H at top edge
Short Base Leg with
letters C or D at top
edge, and letters E
or F at bottom
edges
Front Mid-Section with
letters A and B at
bottom edges and letter
I at top edge
Long Base Leg with
letters A or B at top
edges, and letters E
or F at bottom edges
I
H
D
C
H
H
A
H
B
H
E
H
F
H
F
E