GlideTrak Indoor Trainer, Руководство пользователя

Страница: 11 / 28

GlideTrak Assembly & Set Up
11
GlideTrak™
Seat Assembly Placement and Set Up Instructions
24. The Seat, Bars, Straps, Hooks, and Hip Pad are collectively called the Seat Assembly.
(Photo 14 ) Once your GlideTrak has been fully assembled and positioned properly over the treadmill,
you are ready to attach the Seat Assembly.
Photo 14
Seat Assembly
Seat Pad
Hip Pad
Front Top Strap
Ratchet on
Front Bottom
Strap
Hip Post
Seat Post
Rear Straps
Seat Rail
Adjustment Rod
25. Review Photo 14 to identify each part of the
Seat Assembly and orientation (front, rear, up
and down).
26 . To start, use the Seat Adjustment Knob to
move the Seat along the Seat Rail until the front
edge of the Seat Post is at #4 at the numbered
bar under the Seat Rail.
( Smaller framed individuals may set this to #3.
Larger framed individuals may set to #5 to start)
27 . The Hip Post has 8 holes. Set the Hip Post to
the 4
th
hole from the top.
To do this, press in on the pins on the Hip Post
and, using your other hand, grasp the Hip Pad
and slightly twist and move the Hip Post rod up
or down. Set the pin into the hole that is the 4
th
hole from the top.
Front Mid-
Section
Post with
holes for
front strap
hooks
Rear Mid-Section
Post with holes for
back strap hooks
Photo 15
GlideTrak
Hip Pad
is up and
faces
forward