GlideScope Cobalt AVL, Руководство пользователя и справочник

Страница: 41 / 77

GlideScope
®
Cobalt AVL System
User’s Manual 15
Getting Started
Before you can use your GlideScope Cobalt AVL System, you must inspect
the components, set up the system, and perform a functional test.
Before You Start
Before you use the GlideScope Cobalt AVL System for the first time,
Verathon
®
recommends that you perform the following steps:
1. Inspect the system for any obvious physical damage that may have
occurred during shipment.
2. Set up the Cobalt AVL in your preferred configuration: For specific
instructions on system setup, see page 22.
3. Charge the monitor battery. You can use the system while the battery
is charging. For specific charging instructions, see Charge the
Monitor Battery on page 17.
Note: The GlideScope will operate without charging the battery as
soon as you plug it in to an appropriate power source. Plug in the
Cobalt AVL Monitor using the 12VDC Medical Power Supply provided
only by Verathon.
4. Connect a video baton to the monitor, and when preparing for intuba-
tion, insert the baton into a Cobalt GVL ® Stat. For specific instructions
on connecting the baton, see page 18.
5. Optional: Connect the monitor to an external source (such as a
larger monitor screen) using the HDMI to DVI cable. For specific
instructions, see page 19.
6. Perform a functional check. For specific instructions, see page 20.
7. Optional: Set the system parameters. For specific instructions, see
page 21.
Initial Inspection
When you receive the GlideScope Cobalt AVL System, Verathon recommends
that a biomedical engineer (or other qualified professional familiar with
electronic medical devices) inspect the system for any obvious physical
damage that may have occurred during shipment.
The components you receive vary depending on which configuration you
ordered. To verify that you received the appropriate components, refer to
the packing list included with your system.
Getting Started