22/06/2010 MT04_A30_B_VI110L_GIVI_ENG REV.B
8
32
LEGEND - MESSAGES AND SIGNALS
The following symbols are used in this manual:
SELECTION OF VALUES KEY (SETTING DATA MODE).
SELECTION OF DIGIT KEY (SETTING DATA MODE).
AXIS CLEAR KEY (ALSO USED TO CANCEL THE SETTINGS).
CONFIRMING KEY.
ON/OFF.
FLASHING AXIS LED
●
FIXED AXIS LED
The instrument supplies a series of visual signals which indicate the correct
operating mode.
Every time a key is pressed, messages in writing or figures will appear on the
display, according to setting made (see manual) and indicates the function has
been activated or ready to be carried out. If it is blinking, scale measuring is
taking place; fixed light (or no light at all) indicates the function has been carried
out. In case of incorrect procedures, the following message will appear on the
display:
E r r o r
the above message indicates the operator has inadvertently pressed the wrong
key.
In case of “overflow” (if too many numbers were entered), the error is shown on
display:
- - - - - - - - -
NOTE:
ANY ANOMALY AND SITUATION OF “OPERATING LOCK” DUE TO ACCIDENTAL
REASONS (ELECTRIC DISCHARGE, OVERVOLTAGE, ETC…) ARE SOLVED BY
SWITCHING OFF THE DEVICE. FOR THE ABOVE PURPOSE KEEP THE
BUTTON ON/OFF PUSHED FOR AT LEAST 4 SECONDS.
Содержание VISION 110L
Страница 29: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 29 32 SPECIAL FUNCTIONS ON CUSTOMER S REQUEST...
Страница 30: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 30 32...
Страница 31: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 31 32...
Страница 32: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 32 32...
