22/06/2010 MT04_A30_B_VI110L_GIVI_ENG REV.B
24
32
INCREMENTAL/ABSOLUTE COUNTING
The display always indicates the current counting mode:
ABS
= ABSOLUTE COUNTING
INC = INCREMENTAL COUNTING
SWITCHING ONE COUNTING MODE TO ANOTHER TAKES PLACE BY
PRESSING THE ABS KEY. THE POINT WILL FLASH (OR SWITCH OFF)
INDICATING THAT THE AXIS IS IN ABS MODE (OR IN INC MODE).
The counting system is governed by the counter which for the Axis has a twin
internal counter (ABS/INC). All the information concerning movement of the Axis
is simultaneously updated on both counters. Information entered by the operator,
however, only affects the counting system counter previously chosen.
It is clear then that zero setting ABS counter at a point on the run (ORIGIN) and
adopting incremental counting (more convenient and versatile to use), the
operator will be able to carry out all zero settings, pre-selections, functions, etc..
he requires during machining as, any time he switches back to the ABS counter,
he can be aware of what is the
“absolute”
position the Carriage has reached
and therefore find again the ORIGINS previously set.
Содержание VISION 110L
Страница 29: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 29 32 SPECIAL FUNCTIONS ON CUSTOMER S REQUEST...
Страница 30: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 30 32...
Страница 31: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 31 32...
Страница 32: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 32 32...
