22/06/2010 MT04_A30_B_VI110L_GIVI_ENG REV.B
11
32
All settings for the configuration of device are hereafter described:
Parameter 01
– CHOICE OF AXIS RESOLUTION
It is possible to set up the following resolutions:
1 – 0.1 – 0.05 – 0.01 in millimetres
0.01 – 0.001 – 1/16 – 1/32 – 1/64 in inches
0 / 1 / 2 / 3 decimals in angular reading mode (measurement of
sectors of a circle)
example of setting up the resolution 0.1 mm :
press
To enter the configuration and
select the parameter
P 0 1
press
To confirm the selection and enter
its setting
r 0 . 0 1
press
more
Until the desired resolution
(e.g.: 0.1 in mm)
r 0 . 1
press
To confirm the value and return to
the parameters
P 0 1
press
To quit the configuration.
1 2 3 . 4 5
- CHOICE OF AXIS RESOLUTION IN ANGULAR READING MODE
To make angular measurements (sectors of a circle), a calculation value is used
which is the ratio between the angle to be measured and the length of the
corresponding circumference.
Calculation is made through the following formula:
Calculation value = angle360° / circumference
where :
angle = 360 (in degrees)
circumference = 2
π
r (in millimetres)
example :
radius = 200mm , circumference = 1256.64mm
value = 360 / 1256.64 = 0.28648
Relevant resolution displayed in degrees is selectable by choosing the desired
numbers after the point.
Содержание VISION 110L
Страница 29: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 29 32 SPECIAL FUNCTIONS ON CUSTOMER S REQUEST...
Страница 30: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 30 32...
Страница 31: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 31 32...
Страница 32: ...22 06 2010 MT04_A30_B_VI110L_GIVI_ENG REV B 32 32...
