Gis LP 1000, Перевод оригинального руководства пользователя

Страница: 13 / 32

1
2
13 Swiss Lifting Solutions
The safety directions for handling with loads should be followed (see chapter 0.3) when transporting and assembling the electric chain
hoist. Electric chain hoists must be assembled by qualified staff, always bearing in mind the accident prevention directions in chapter 0.2.
Before assembly, the electric chain hoist must be stored in an closed room or covered area. Should the electric chain hoist be destined for
operation outdoors, then it is recommended that a protective cover is erected to shield it from the effects of the weather.
2.1 Transport and assembly
Mechanical adjustments may only be performed by authorised specialists.
Operating staff must carefully read the instruction manual of the electric chain hoist before initial start-up and carry out all the
checks. The device shall be put back into operation only after operational safety has been established. Unauthorised persons
may not operate the device or carry out work with it.
The operator must create an inspection pass during the commissioning of the electric chain hoist. The inspection pass con-
tains all the technical data and the date of commissioning. It provides a record of all servicing and maintenance work.
2 Start-up
Figure 1-5 Figure 1-6 Figure 1-7
Figure 1-2 Figure 1-3 Figure 1-4