Gira Alarm Connect, Руководство по эксплуатации

Страница: 7 / 52

7
Sleep mode
General
Wireless operating unit with 12-V power supply
We recommend operating the wireless control unit with the DC 12 V flush-
mounted power supply (Item No. 5219 00), because all functions are then fully
available.
Wireless operating unit without 12-V power supply
The wireless control unit is only supplied with power via the four internal
batteries. In order to spare the battery capacity and increase the service life, the
following functions are only available to a limited extent:
• Permanent illumination of the display is not possible.
• In sleep mode, alarm and fault messages are only signaled by the flashing
status LED (three-second interval).
The following describes the wireless control unit with 12-V power supply and
the setting "Display continously on" (also see page 31).
Sleep mode
The control panel of the wireless operating unit changes to sleep mode after
about 30 seconds.
Before you want to take action (turn on the power, go to the menu or info page,
trigger the alarm, etc.), you can quit the sleep mode by pressing the
OK button;
i.e. the display is switched on.
Security instructions