Gira Alarm Connect, Руководство по эксплуатации

Страница: 32 / 52

32
7.5 Assign, change or reset the user PIN and deactivate or activate users
The stored user names are shown in the submenu "User management".
Assign or change user PIN
The following users need their own four-digit PIN:
• The Administrator.
• The installer (can only change the PIN in the GPA).
• Any user with or without administrator rights.
• The security guard (only if alarm forwarding to a security service has been
activated in the project).
1. Pull up the extended menu and press the key to navigate to the submenu
"User management", then confirm by pressing OK .
2. Press the key and select a user; then press ok to confirm.
3. Press the key to navigate to "Change PIN" and confirm with ok .
4. nter a 4-digit PIN that has not yet been assigned.
5. Confirm with the new PIN.
Reset the User PIN
1. Repeat steps 1 to 2 in the chapter "Assigning a user PIN".
2. Press the key to navigate to "Reset PIN" and confirm with ok .
3. Confirm with an Administrator PIN.
Deactivating or reactivating the user
1. Repeat steps 1 to 2 in the chapter "Assigning a user PIN".
2. Press the key to navigate to "User status" and confirm with ok .
3. Select "enabled" or "disabled" and confirm the selection with the OK button.
Extended menu