32
Delete cameras:
All camera assignments are
cleared here. The values in the menus Fre-
quency, Lighting, Brightness, Contrast and Col-
our are reset to the factory setting.
"Delete cameras" is, for example, required if the
bus connector of the video door station is to be
replaced.
Once you have executed this function, the cam-
eras must be registered again. For this purpose,
start the programming mode on the control
device and press any call button on all door sta-
tions with a colour camera for 3 s each.
Impor-
tant:
Go through the door stations in the order
which is to be displayed later in the video image
(e.g. Main door Camera 1, Side door Camera 2
etc.).
Delete call assignment:
Here all assigned call
buttons and the ringing tone melodies are
deleted or reset.
Delivered state:
Here all menu items of the
home station reset to the factory setting. In addi-
tion, the assignments to call buttons and colour
cameras are deleted.
Version
Information on the version and the current soft-
ware revision of the home station are shown
here.
Version
I00
E904AF
FW 0219-0222-0143
HW 000604-090C3
Back
12791390.fm Seite 32 Mittwoch, 24. September 2014 1:22 13
