41
Assigning a switching actuator to the surface-mounted home station
video
1.
Control device
: press the "Systemprogr." but-
ton for 3 s to start the programming mode.
✓
The LED of the last set operating mode flashes
at the
switching actuator
.
2. Press the "Funktion" button on the
switching
actuator
several times until the LED of the
desired operating mode flashes.
3. Press the "Progr." button on the
switching
actuator
for 3 s until the LED next to the but-
ton flashes.
4. Press the "Menu" button on the
home station
to open the Start-up menu.
5. Select the menu item "Assign" in the Start-up
menu of the
home station
.
6. Select the menu item "Switching action" in
the "Assign" menu.
7. Select the desired switching action (1-10) and
confirm it with
OK
.
✓
A long acknowledgement tone indicates
successful assignment.
8. Briefly press the "Systemprogr." button on
the
control device
to exit the programming
mode.
3s
Funtkion
3s
Progr.
Assign >
Switch. action >
Switch. action 1
1x
12791390.fm Seite 41 Mittwoch, 24. September 2014 1:22 13
