27
Start-up menu
To open the Start-up menu:
1. Press the programming button on the
control
device
for 3 s to start the programming
mode.
✓
flashes on the home station.
If the home station has already been assigned
call buttons,
lights up.
2. Briefly press
Menu
to open the Start-up
menu.
The following setting options are available in the
Start-up menu:
Basic setting
Here the functions
• Main display
• Resistor
• TFT manually on
can be activated or deactivated. The desired
function is selected with
and confirmed
with
OK
.
An active function is marked with "
".
Basic setting - Main display
Factory setting: Main display
If several home stations with a video function
are operated in one flat, a maximum of
one
home station with video function may serve as
the main display per call button; the others are
defined as auxiliary displays.
The
main display
is automatically switched on
with an incoming door call.
The
auxiliary displays
are only switched on with
a call acceptance at the respective home station
after a door call or via the
(without accept-
ing the call).
Menu
Basic setting
>
Frequency
>
Lighting
>
Assign
>
Back
OK
Basic setting
Main display
Resistor
TFT manually on
Back
OK
12791390.fm Seite 27 Mittwoch, 24. September 2014 1:22 13
