39
Assigning surface-mounted home station video to a flush-mounted
home station
The so-called internal call function can be real-
ized with the surface-mounted home station
video. A voice connection between two home
stations can be established via the internal call.
To assign the surface-mounted home station
video to another home station, proceed as fol-
lows:
1.
Control device
: press the "Systemprogr." but-
ton for 3 s to start the programming mode.
2.
Home station: p
ress the "Menu" button to
open the Start-up menu.
3. Select the menu item "Assign" in the Start-up
menu of the
home station
.
4. Select the menu item "Internal call" in the
"Assign" menu.
5. Select the desired internal call (1-10) and
confirm it with
OK
.
✓
The surface-mounted home station video
outputs a long acknowledgement tone.
At the same time, the counter "S" of the
temporarily stored internal calls is increased by
1.
6. Press the button
on the
home station
for
3 s until a brief acknowledgement tone is
heard.
✓
A long acknowledgement tone indicates
successful assignment.
Three short acknowledgement tones indicate
faulty assignment. The memory of the home
station (flush-mounted home station max. 10,
surface-mounted home stations max. 15 call
buttons) may already be occupied.
7. Briefly press the "Systemprogr." button on
the
control device
to exit the programming
mode.
3s
Assign >
Internal call >
Internal call 1
S: 1:20
3s
1x
12791390.fm Seite 39 Mittwoch, 24. September 2014 1:22 13
