Gima UTC2, Инструкция по эксплуатации

Страница: 40 / 56

MA531_EN EN 38
UTC2
CURRENT
From HOME choosing the option “Current” it is possible to use the equipment in a traditional manner.
NOTE: To use the option “Current”, it needed to connect the cable accessory, in the contrary case, it ap-
pears a warning message.
Selecting this manner for every channel (in the case we use the method of working with not associated channels, see
SETTINGS “Channels dependence”), it is requested for every available channel to insert the number of phases where
we desire using the same channel. Note: using the interferential currents (IF Tetrapolar – IF isoplanar – IF vectorial) it is
possible to use only one phase, apart from the number of selected phases.
After have chosen the number of phases it is possible to insert for every channel the family of current we have to use and
requests the type’s choice (in the internal of the family) of current we have to use and to insert the time for every used
phase.
After have chosen the current it is possible to modify or accept the characteristics (frequency, time of action, pause polar-
ity etc.).
To accept, select and confirm the icon OK.. To modify the parameters, select and confirm respective icon, selecting this
command appears one popup of variable parameters.
Repeat this for every single channel.
PHASE 1 PHASE 2
PHASE 3
3 phases Dyadinamic DFS 30:00 min
Pos/Neg 50 Hz
5 sec 5 sec
After have modified or accepted the characteristics one proceeds to the Working screen