OPERATION AND
MAINTENANCE MANUAL
EN
MU_027
Rev.1
29/04/2020
Page 16 of 33
5.3.2
Moving the stand
Risk of lamp overturning.
Whenever the stand has to be moved, make sure the swinging arm
is moved downwards.
Failure to do so could cause the lamp to overturn.
5.4
Checks to be made every time before
use
To make sure the Product is safe and provides a correct diagnosis,
every time before use, the operator must check:
-
The lamp has been correctly disinfected;
-
The emitted light is stable and of adequate intensity;
-
The swinging arm maintains correctly its position;
-
The cupola maintains correctly its position.
6
Cleaning and disinfecting
The responsible organization must comply with the rules (standards
and directives) concerning hygiene, disinfection and sterilization
laid down by the relevant national commission.
6.1
Application method
Interrupt the power supply
before cleaning the Product.
Before proceeding to clean / disinfect the Product, make sure it is
off and cannot be switched back on.
Allow the lamp to cool down and only clean it when it is cold.
Possibility of damaging the
Product.
Protect the Product from water spray and detergents and do not
clean it in direct contact with liquids.
Application method
Do not spray detergent / disinfectant directly on Product.
Spray the detergent / disinfectant on a cloth so as to dampen it.
Содержание GIMAled81
Страница 37: ...MANUALE D USO E MANUTENZIONE IT MU_027 Rev 1 29 04 2020 Pag 13 di 33 Modello a piantana...
Страница 57: ...MANUALE D USO E MANUTENZIONE IT MU_027 Rev 1 29 04 2020 Pag 33 di 33 Note...
Страница 94: ...OPERATION AND MAINTENANCE MANUAL EN MU_027 Rev 1 29 04 2020 Page 13 of 33 Mobile model...
Страница 114: ...OPERATION AND MAINTENANCE MANUAL EN MU_027 Rev 1 29 04 2020 Page 33 of 33 Notes...
