51
Guidance and manufacturer’s declaration – electromagnetic emission
The device is intended for use in the electromagnetic environment specified below.
The customer of the user of the device should assure that it is used in such
and environment.
Emission test
Compliance
Electromagnetic environment – guidance
RF emissions
Group 1
CISPR 11
RF emission
Class B
CISPR 11
APPENDIX
Guidance and manufacturer’s declaration – electromagnetic
emissionsfor all EQUIPMENT and SYSTEMS
The device uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
The device is suitable for use in all
establishments other than domestic and those
directly connected to a low voltage power
supply network which supplies buildings
used for domestic purposes
Guidance and manufacturer’s declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below.
The customer or the user of device should assure that it is used in such an environment.
Immunity test
IEC60601
Compliance
Electromagnetic
test level
level
environment - guidance
Electrostatic
±6 kV contact
±6 kV contact
discharge (ESD)
±8 kV air
±8 kV air
IEC61000-4-2
Power frequency
3A/m
3A/m
(50/60Hz)
magnetic field
IEC61000-4-8
NOTE: U
T
is the a.c. mains voltage prior to application of the test level.
Floors should be wood, concrete
or ceramic tile. If floor are covered
with synthetic material, the relative
humidity should be at least 30%.
Mains power quality should be
that of a typical commercial
or hospital environment.
Guidance and manufacturer’s declaration – electromagnetic immunity –
for all EQUIPMENT and SYSTEMS